The JV-BB series of Positive Displacement Flow meters maintain 0.5% accuracy over the full range of the meter, high resolution, and pressure rating up to 6,000 psi. These PD meters are available in 3 body materials (Aluminum, 303 SS, and 316L SS) and were designed for measuring lubricating and nonabrasive fluids with low or medium viscosity.

Applications include:

• Chemical injection & dosing systems
• Fuel measurement
• Test stands
• Hydraulic positioning systems
• Coolant & lubrication monitoring

Designed for use in systems rated up to 15,000 psi (1035 bar), the JVH meters are well suited for oils, fuels, additives, and chemicals in hazardous areas. JVH meters come standard with inconel bolts for added strength and better corrosion resistance. The internal design has reduced space between the gears and measuring chamber to reduce slippage and improve the low flow performance of the meter.

Applications include:

• Offshore production platforms, i.e. chemical injection
• Hydraulic power units
• Gas dehydration systems
• Chemical processing plants

The JV-UF is designed for low viscosity fluids (solvents, scale inhibitor, methanol, DEF) thanks to the exceptionally tight clearances around the gears which prevent fluid from slipping past. This meter can measure very low flow rates (as low as 0.0005 gpm with a 5cP fluid and as high as 20 gpm).

Applications include:

• Chemical injection
• Fuel injection & dosing systems
• Test stands
• Hydraulic positioning systems
• Coolant & lubrication monitoring

JV-TC Positive Displacement Flow Meters were designed for measuring non-lubricating and filled fluids due to the specialized gear/shaft design, increased pressure rating (up to 6,000 psi), and improved flushability. These factors, along with the standard 7-point calibration and new EDGE sensor give you a 0.5% accurate meter across the full flow range – even in changing viscosity conditions.

Applications include:

• Filling and dosing systems
• Paint shops and delivery systems
• Polyurethane systems
• Multiple-component mixing systems
• Adhesive dispensing systems
• Hydraulic systems

The SLG Compact Positive Displacement Spur Gear Meter is designed for measuring paints & coatings such as are found in the automotive industry. These stainless steel meters feature small, light bodies, perfect for installation on robotic arms and in other tight areas. Flow meter construction incorporates virtually no “dead space,” which allows for extremely efficient flush cycles and worry-free color changes.

• Rugged stainless steel construction performs under a variety of harsh, fast-paced conditions.
• Compact, light-weight meters are suitable where robotics is utilized or space is limited.
• Typical application is automotive paint lines.