The High Temp VA Meter is a low-cost alternative to other flow meters, and is available in brass, aluminum, and stainless steel to meet system and fluid requirements. Designed for high temperature fluids, this meter is available in two series: H-Series for fluids up to 400°F, and the J-Series for fluids up to 600°F. The rugged, weather-proof design allows for outdoor installation and wash-downs, unrestricted mounting (horizontal, vertical, and inverted), as well as years of maintenance-free performance. The meter allows measures flows from 0.1 to 150 GPM, and is offered in NPT, SAE, and BSPP ports.

Applications include:

  • Barrel heating fluids
  • Thermal transfer fluids, such as Syltherm
  • Coolant flows
  • Hydraulic circuits & sub-circuits
Unit of Measure
Items
HiTemp Group-450x469.jpg

High Temperature Flow Meter
List Price $407.00

HiTemp Group-450x469.jpg

High Temperature Flow Meter
List Price $482.00

HiTemp Group-450x469.jpg

High Temperature Flow Meter
List Price $407.00

HiTemp Group-450x469.jpg

High Temperature Flow Meter
List Price $482.00

HiTemp Group-450x469.jpg

High Temperature Flow Meter
List Price $407.00
Manufacturer Name N/A AW-Lake Company
Type N/A High Temperature Flow Meter
Meter Style N/A 400°F In-line
Port Size Range N/A 1/4" - 1/2"
Material N/A Aluminum
Operating Pressure [Max] N/A 240 bar3500 psi
Fluid Media N/A Oil
Porting/Thread Type N/A 1/2" NPTF, dry seal
Flow Ranges - Liquid N/A 0.1 to 1 gpm N/A 0.1 to 1 gpm N/A 0.2 to 2 gpm N/A 0.2 to 2 gpm N/A 0.5 to 5 gpm
Optional Flow Directions N/A Standard Flow, Uni-Directional N/A Reverse Flow N/A Standard Flow, Uni-Directional N/A Reverse Flow N/A Standard Flow, Uni-Directional
Measuring Accuracy N/A ±2.0% of Full Scale
Repeatability N/A ±1% of full scale
Flow Measuring Range N/A 0.1 to 150 gpm0.4 to 560 L/min
Operating Temperature [Max] N/A 400 ºF204 ºC
Standard Calibration Fluids N/A Air meters: air at 70°F (21°C), 1.0 sg & 100 PSIG (6.8 bar) Oil meters: DTE 25® at 110°F (43°C), 0.873 sg Water meters: water at 70°F (21°C), 1.0 sg
Filtration Requirements N/A 74 micron filter or 200 mesh screen minimum
Viscosity N/A Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory.
Window Tube Material (Non-Wetted Components) N/A Pyrex®
Window Seals Material (Non-Wetted Components) N/A PTFE
Casing & End Ports Material (Wetted Components) N/A Anodized Aluminum
Ports Material (Wetted Components) N/A FKM w/ PTFE backup
Transfer Magnet Material (Wetted Components) N/A PTFE coated Alnico
All Other Internal Parts Material (Wetted Components) N/A Stainless Steel
A N/A 1-7/8 in48 mm
B N/A 6-9/16 in167 mm