The HUB-40EX Flow Sensor is certified for hazardous areas by CSA (US & Canada), ATEX, and IECEx. It features a NEMA 4X enclosure to protect from environmental conditions and has an integrated swivel union, allowing users to rotate for easy wiring. The HUB-40EX puts out a square wave output signal with a duty cycle of approximately 50%, which is protected by a self-resetting fuse. The easy thread-in installation means you are up and running in minutes.
Available Outputs:
- Frequency (square wave with 50% duty cycle)
EX Certifications:
- CSA (US & Canada)
- ATEX
- IECEx
Recommended Sensors
Manufacturer Name |
N/A AW-Lake Company |
Type |
N/A Flow Sensor |
EX Certification |
N/A cCSAus |
Junction Box Options |
N/A 316 SS junction box |
Sensor Type |
N/A Hall sensor (sourcing version) |
Termination |
N/A Terminal block |
Supply Voltage |
N/A 10 to 24 V |
Supply Current |
N/A 12 mA at 24 VDC 65 mA Maximum 8 mA at 12 VDC |
Sensor/Monitor Frequency Output |
N/A Flow dependent, 0.5 Hz minimum |
Output Amplitude |
N/A VHIGH = VSUPPLY - 0.7 Volts VLOW = 0 Volts |
Duty Signal |
N/A 50% ± 15% |
Connections |
N/A Cable with 1/2” male NPT Terminal block, 1/2” female NPT conduit entrance |
Enclosure Rating |
N/A TYPE 4X |
cCSAus Certification |
N/A Class I, Div. I, Groups C, D Class II, Div. I, Groups E, F, G Class III |
ATEX Certification |
N/A II 2 G, Ex d IIB+H2 T5 Gb, Ta = -40°C to +60°C |
IECEx Certification |
N/A Ex d IIB+H2 T5 Gb Ta = -40°C to +60°C |
Operating Temperature [Min] |
N/A -20 ºC-4 ºF |
Operating Temperature [Max] |
N/A 60 ºC140 ºF |
A |
N/A 1.7 in42.6 mm |
B |
N/A 3.6 in91.8 mm |
C |
N/A 3.9 in99.3 mm |
D |
N/A 3.6 in91.9 mm |
N/A
|
N/A
Up and Running in Minutes Flexible Mounting Weather-Proof Enclosure Built-In Protection |
Quantity Available |
N/A {Unknown} |
*1-5 Pieces |
N/A {Unknown} |
*6-10 Pieces |
N/A {Unknown} |
Std Lead Time |
N/A {Unknown} |