Print Back

This simple to install, all-in-one unit is fully assembled and factory calibrated for easy installation. They provide proportional analog or pulse outputs that will drive popular data acquisition devices, meters, and analog input cards. In addition to the transmitted flow data, the transmitter also provides visual flow levels on the local scale. The weather tight NEMA 4x cast aluminum enclosure allows for installation outdoors and where liquid-tight seals are required.

Applications include:

  • Batching
  • Industrial process control systems
  • Mobile hydraulic equipment
  • Computer or PLC controlled hydraulic system monitoring
Transmitter Group-450x469.jpg
Unit of Measure
Items Transmitter Group-450x469.jpg
R3A6HG10
Flow Rate Transmitters
List Price $885.00
Transmitter Group-450x469.jpg
R3A4AB02
Flow Rate Transmitters
List Price $885.00
Transmitter Group-450x469.jpg
R3A4AB05
Flow Rate Transmitters
List Price $885.00
Transmitter Group-450x469.jpg
R3A4AB10
Flow Rate Transmitters
List Price $885.00
Transmitter Group-450x469.jpg
R3A4AB15
Flow Rate Transmitters
List Price $885.00
Manufacturer Name N/A AW-Lake Company
Type N/A Flow Rate Transmitter
Port Size Range N/A 1/4" - 1/2"
Material N/A Aluminum
Operating Pressure [Max] N/A 240 bar3500 psi N/A 40 bar600 psi N/A 40 bar600 psi N/A 40 bar600 psi N/A 40 bar600 psi
Fluid Media N/A Oil N/A Air & Gases N/A Air & Gases N/A Air & Gases N/A Air & Gases
Porting/Thread Type N/A #10 SAE, O-ring seal N/A 1/2" NPTF, dry seal N/A 1/2" NPTF, dry seal N/A 1/2" NPTF, dry seal N/A 1/2" NPTF, dry seal
Flow Range - Liquid N/A 1 to 10 gpm N/A 0.2 to 2 gpm N/A 0.5 to 5 gpm N/A 1 to 10 gpm N/A 1 to 15 gpm
Flow Range - Air N/A 10 to 100 scfm N/A 4 to 23 scfm N/A 5 to 50 scfm N/A 10 to 100 scfm N/A 25 to 150 scfm
Optional Flow Direction N/A Standard Flow, Uni-Directional
Measuring Accuracy N/A ±2.0% of Full Scale
Repeatability N/A ±1% of full scale
Flow Measuring Range N/A 0.1 to 150 gpm0.5 to 550 L/min1 to 600 slps2 to 1300 scfm
Operating Temperature [Max] N/A 185 ºF85 ºC
Standard Calibration Fluids N/A Air meters: air at 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar) Oil meters: DTE 25® at 110°F (43°C), 0.873 sg Water meters: tap water at 70°F (21°C), 1.0 sg
Filtration Requirements N/A 74 micron filter or 200 mesh screen minimum
Viscosity N/A Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory.
Power Requirements N/A 12-24 VDC, Regulated
Load Driving Capacity N/A 0-5 VDC (regulated): Minimum load resistance 1000 Ω. 1-5 VDC* (regulated): Minimum load resistance 25 K Ω. 4-20mA: Load resistance is dependent on power supply voltage. Max Loop Load (Ω) = 50 (Power supply volts – 12). Square Wave Pulse: Minimum load resistance 1000 Ω. Use the following equation to calculate maximum load resistance:
Transmission Distance N/A <200 feet recommended for 0-5 VDC (regulated) and square wave pulse. 4-20mA and 1-5 VDC (regulated) are limited only by wire resistance and power supply voltage.
Over-Current Protection N/A 35 mA
Resolution N/A 10-bit (0.1%)
Response Time N/A <100 milliseconds
Enclosure & Cover Material N/A Painted Aluminum
Seal Material - Non-wetted N/A Buna-N®
Window Material N/A Pyrex®
Din Connector Material N/A Polyamide
Casing & End Ports Material N/A Anodized Aluminum
Seal Material - Wetted N/A Buna-N (STD), EPR, FKM or Kalrez®
Transfer Magnet Material N/A PTFE coated Alnico
All Other Internal Parts Material N/A Stainless Steel
A N/A 6-9/16 in167 mm
B N/A 2-3/16 in56 mm
C N/A 4 in101 mm
D N/A 1-7/8 in47 mm
E N/A 4-7/8 in128 mm
F N/A 2-1/4 in57 mm