Item # FACR, FAC-R Frequency to Analog Conventer

Gear Meters Gear Meters
Variable Area Meters Variable Area Meters
Coriolis Mass Flow Meters Coriolis Mass Flow Meters
Paddle Wheel Flow Meter Paddle Wheel Flow Meter
Helical Flow Meters Helical Flow Meters
Turbine Flow Meters Turbine Flow Meters
Ultrasonic Flow Meters Ultrasonic Flow Meters
Flow Electronics Flow Electronics
Rotary Piston Rotary Piston
Turbidity Sensor Turbidity Sensor

Gear Meters

Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.

Learn More

Variable Area Meters

Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.

Learn More

Coriolis Mass Flow Meters

TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.

Learn More

Paddle Wheel Flow Meter

Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.

Learn More

Helical Flow Meters

Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.

Learn More

Turbine Flow Meters

Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.

Learn More

Ultrasonic Flow Meters

Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.

Learn More

Flow Electronics

Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.

Learn More

Rotary Piston

Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.

Learn More

Turbidity Sensor

AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.

Learn More

Fluid Power / Hydraulics

Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.

Oil & Gas

From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.

Heavy Industrial

For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.

Paints/Sealants/Adhesives

Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.

Water Cooling

Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.

General Industrial

General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.

Test Systems

With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.

Alternative Energy

As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.

Marine

In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.

Chemical

AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.

Environmental

As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.

Our Products

The flow measurement products produced and/or supplied by AW-Lake include the following:

Request Information

List Price

$415.00

Qty.

Std Lead Time
Add To Cart

Quick Ship

Quantity Available
*1-5 Pieces
*6-10 Pieces

The FAC-R Frequency to Analog Converter is a handy tool for converting your frequency signal to an milliamp or voltage analog signal simultaneously. Manual switches allow you to set parameters for maximum frequency output, but this is done more easily and efficiently using the Bluetooth mobile app or PC software toolkit. The mobile and PC toolkit allow you to set flow units, time base, K-factor, and maximum flow rate. The FAC-R actually functions as a flow monitor where you can view real-timemore

Unit of Measure

Type	N/A Frequency Analog Converter
Input Frequency	N/A 0.25Hz to 5KHz, 5V to 24V max amplitude
Supply Voltage Range	N/A 10 to 28 V
Analog Output Options	N/A 0-5V, 1-5V & 2-10V - Available through PC Toolkit or "FAC Terminal" mobile app 4-20mA & 0-10V - Default
Standard Max Output	N/A +2.5% of max scaling (20.5mA/5.125V/10.25V)
Error Indication	N/A +10% of max scaling (22mA/5.5V/11V)
Analog Output Resolution	N/A 16 bit
Analog Output Update Time	N/A 25 ms
Ambient Temperature [Min]	N/A 40 ºF40 ºC
Ambient Temperature [Max]	N/A 185 ºF85 ºC

A	N/A 4-1/4 in
B	N/A 3-3/4 in
C	N/A 1 in

N/A The FAC-R Frequency to Analog Converter is ideal in any application when sending an analog signal to a PLC or other control system. It works with any frequency output sensor, such as flow meters, tachometers, pumps/motors, and linear or rotational encoders.

N/A

Full input frequency range 0.25Hz to 5,000Hz
Analog output signal defaults to 4-20mA and 0-10V (0-5V, 1-5V & 2-10V available through PC Toolkit or "AWL Mobile Toolkit" mobile app)
Excellent linearity, high temperature stability and long-term stability
Powered by 10-28VDC
16-bit analog output resolution
Bluetooth enabled for wireless setup from a mobile device

N/A

Bluetooth
These modules are equipped with Blootooth for easy trouble-shooting and setup using our “AWL Mobile Toolkit” App.

Setup Options
Choose from the “AWL Mobile Toolkit” application, the AW-Lake Toolkit PC software, or the local switches on the device to set your parameters.

Economical
This device is a much better investment than a high-speed PLC counter card and eliminates the need for a multimeter.

Linearizer
To improve output accuracy with some flow meters which are non-linear, a 10-point linearization table can be utilized through the Bluetooth app.

Wireless Hand-Held Display
Using the Bluetooth mobile app on your phone, you now have a wireless flow monitor in your hand!

Streamlined Setup
The Bluetooth app makes setup and scaling much easier, because no longer do you need to walk from the device to your monitoring equipment when fine-tuning your adjustments.

Our Products

Type

Input Frequency

Supply Voltage Range

Analog Output Options

Standard Max Output

Error Indication

Analog Output Resolution

Analog Output Update Time

Ambient Temperature [Min]

Ambient Temperature [Max]