Request Information
Ideal for monitoring various fluids in applications in industrial flow measurement where a simple, compact & easy-to-use remote panel meter is required.
Unit of Measure

Manufacturer Name

 N/A AW-LAKE COMPANY

Motion Item Number

 N/A 07514191

MINO

 N/A 05596X10020

UOM

 N/A EA

Type

 N/A Panel Mount Process Monitor

Series

 N/A MX 9000

Main Board

 N/A Single channel flow/total

Output

 N/A 4-20mA output

Option Boards

 N/A No option board

Options

 N/A No add options

Power Requirement

 N/A 14 to 16 VAC/250mA, or 18-24 VDC/200mA (customer supplied), or 120/240 VAC (optional).

Analog Output 4-20mA

 N/A External-powered loop output into a maximum 500 ohm load impedance with 24 VDC supply. 2nd loop output optional.

Frequency Inputs

 N/A 0-4 KHz, sine, square or saw-tooth; 4 volts minimum amplitude; 3.3 Kohm maximum impedance.

Integrated Linearization

 N/A Maximum 10-point linearization table for improved accuracy over range.

Flow Sensor Power Supplies

 N/A (2) at 15 VDC / up to 50 mA each

D

 N/A 5.5 in139 mm

D1

 N/A 5.2 in132 mm

W

 N/A 3.8 in97 mm

H

 N/A 2.8 in72 mm

H1

 N/A 2.58 in65 mm

N/A

    Rate, total, limit, batch and ratio options
  • Single or dual channel
  • Two programmable Form C relay outputs (optional)
  • One or two assignable 4-20 mA output (optional)
  • Data logging capabilities
  • Easy-to-read LCD display with color backlight that changes color for warning or alarm
  • Batch controller - stores up to 20 batch recipes

N/A

    The MX 9000 Process Monitor is a versatile, multi-functional device that helps you track rate, total, limit, ratio, and more. Standard unit is one channel. Optional two channels allow you to monitor dual flows, and display them in a number of ways: separately, as a sum (for example in total material use), as a difference (as in fuel consumption), or as a ratio of product A/product B. Also use the MX 9000 to detect bi-directional flow when A and B channel signals are available from a single flow meter.
    The MX 9000 has a number of related functions that add to its capabilities. Four model variations (see reverse side) give the MX 9000 the capability of performing limit, warning and alarm duties.

N/A

Monitoring Versatility
The MX 9000 is available with one or two channels, to monitor:

  • Flow rate from one or two meters
  • Flow volume (sum or difference of two flows)
  • Ratio (product A/product B)

Intuitive Setup PC Software
The MX 9000 can be setup from the convenience of your PC with a simple download of the MX 9000 Toolkit software, found on the AW-Lake website (www.aw-lake.com/software/). You can change all settings from the PC Toolkit, including:

  • K-factor
  • Limits
  • Analog outputs
  • Flow measurement units

Customizable Housing Options
The MX 9000 is available in custom enclosures to meet your application requirements.

Easy Remote Programming
This unit can be easily programmed to display what you need in a variety of engineering units.

Up and Running in Minutes
Easy plug-in installation. A quick setup procedure allows you to have the flow monitor working with just a few simple programming steps.