Request Information
Hydraulic Test Analyzer is used to diagnose faults in hydraulic circuits, determine horsepower and test for component wear and cylinder leakages. Two options are available: K Series (flow & pressure) and T Series (flow, pressure & temperature).
Unit of Measure

Manufacturer Name

 N/A AW-Lake Company

Type

 N/A Hydraulic Test Analyzer

Style

 N/A Temperature & Pressure

Material

 N/A Aluminum

Connection Type

 N/A Threaded

Porting/Thread Type

 N/A 3/4" NPTF, dry seal

Port Size Range

 N/A 3/4" - 1"

Fluid Media

 N/A Oil & 0.873 specific gravity

Volume Flow Rate [Liquid]

 N/A 1 to 15 gpm5 to 55 L/min

Maximum Operating Temperature

 N/A 116 ºC240 ºF

Standard Calibration Fluid

 N/A Oil meters: DTE 25® at 110°F (43°C), 0.873 sg

Measuring Accuracy

 N/A Flow: ±2% of full scale Pressure: ±2.5% of full scale Temperature: ±2.5% of full scale

Repeatability

 N/A ±1% of full scale – all measurements

Flow Measuring Range

 N/A Flow: 0.1–150 GPM (0.5-550 LPM) Temperature: 0–250°F (-20–120°C)

Max. Pressure Rating

 N/A 200 bar3000 psi

Filtration Requirements

 N/A 74 micron filter or 200 mesh screen minimum

Viscosity

 N/A up to 110 cSt

Optional Flow Directions

 N/A Standard Flow, Uni-Directional

Process Port Type

 N/A 3/4" NPT

Needle Valve Material

 N/A Carbon Steel

Casing and End Ports Material

 N/A Anodized Aluminum

Seal Material

 N/A Buna-N® (STD) EPR FKM Neoprene (optional)

Transfer Magnet Material

 N/A PTFE coated Alnico

All Other Internal Parts Material

 N/A Stainless Steel

Window Tube Material

 N/A Polycarbonate

Window Tube Seals

 N/A Buna-N®

Gauge Material

 N/A Brass and Stainless Steel

Gauge Window Material

 N/A Acrylic

A

 N/A 11.14 in283 mm

B

 N/A 6.18 in157 mm

C

 N/A 5.07 in129 mm

N/A A Complete Troubleshooting System
Style K consists of the flow meter, precision needle-type load valve and Glyerin filled pressure gauge. Style T adds a Thermowell protected temperature gauge.

Planned Component Repairs
This system analyzer can be part of a predictive maintenance program, allowing strategized pump, valve, motor and cylinder rebuilding.

Compact and Rugged
The complete hydraulic system test analyzer is small enough to fit in a tool box and built to withstand rigorous industrial use.

Non-Electrical
Without batteries to fail or other electrical power connections to make, this system will provide a lifetime of simple and reliable operation.

Metric and US/Standard Measuring Ranges
These multi-measurement analyzers simultaneously measure flow in GPM and LPM, pressure in PSIG and Bar, and temperature in degrees F and C.

Unrestricted Mounting
Accurate measurements can be taken in any mounting orientation, without the straigh plumbing required with other analyzer systems.

Reverse Flow Option Available
Optional built-in reverse bypass mechanism prevents potential damage from misinstallation or backflow.

Quantity Available

 N/A {Unknown}

*1-5 Pieces

 N/A {Unknown}

*6-10 Pieces

 N/A {Unknown}

Std Lead Time

 N/A {Unknown}