Gear Meters
Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.
| Items |
 C4A5HH10 Case Drain Flow Meter List Price $344.00
|
C4A5HC05 Case Drain Flow Meter List Price $334.00
|
C4A5HJ20 Case Drain Flow Meter List Price $344.00
|
C3A5HF05 Case Drain Flow Meter List Price $230.00
|
C4A5HJ10 Case Drain Flow Meter List Price $344.00
|
|||||
| Manufacturer Name | AW-Lake Company | |||||||||
| Type | Flow Meter | |||||||||
| Port Size Range | 3/4" - 1" | 3/4" - 1" | 3/4" - 1" | 1/2" | 3/4" - 1" | |||||
| Material | Aluminum | |||||||||
| Operating Pressure [Max] | 69 bar1000 psi | |||||||||
| Fluid Media | Oil | |||||||||
| Porting/Thread Type | #12 SAE, O-ring seal | 3/4" NPTF, dry seal | #16 SAE, O-ring seal | #8 SAE, O-ring seal | #16 SAE, O-ring seal | |||||
| Flow Ranges | 1 to 10 gpm5 to 37.5 L/min | 0.5 to 5 gpm2 to 19 L/min | 2 to 20 gpm10 to 75 L/min | 0.5 to 5 gpm2 to 19 L/min | 1 to 10 gpm5 to 37.5 L/min | |||||
| Measuring Accuracy | ±5% of Full Scale | |||||||||
| Repeatability | ±1% of full scale | |||||||||
| Style | Case Drain | |||||||||
| Flow Measuring Range | 0.1 to 30 gpm0.5 to 115 L/min | |||||||||
| Operating Temperature [Max] | 240 ºF116 ºC | |||||||||
| Standard Calibration Fluids | Oil meters: DTE 25® at 110°F (43°C), 0.873 sg Water meters: tap water at 70°F (21°C), 1.0 sg | |||||||||
| Filtration Requirements | 74 micron filter or 200 mesh screen minimum | |||||||||
| Viscosity | Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory. | |||||||||
| Window Tube Material (Non-Wetted Components) | Polycarbonate | |||||||||
| Window Seals Material (Non-Wetted Components) | Buna-N® | |||||||||
| Casing Material (Wetted Components) | Anodized Aluminum | |||||||||
| Ports Material (Wetted Components) | Non-anodized Aluminum | |||||||||
| Seals Material | Buna-N® | |||||||||
| Transfer Magnet Material (Wetted Components) | PTFE coated Alnico | |||||||||
| All Other Internal Parts Material (Wetted Components) | Stainless Steel | |||||||||
| A | 2-3/8 in60 mm | 2-3/8 in60 mm | 2-3/8 in60 mm | 1-7/8 in48 mm | 2-3/8 in60 mm | |||||
| B | 7-5/32 in182 mm | 7-5/32 in182 mm | 7-5/32 in182 mm | 6-9/16 in167 mm | 7-5/32 in182 mm | |||||
|
|
||||||||||
