Request Information

The RT-30SD flow transmitter is a rugged and versatile industrial display.  The weather-proof NEMA-4x/IP-65 housing makes it perfect for indoor and outdoor use where it may see tough conditions. The digital display offers a variety of screens, including Rate, Total, Grand Total, Status, and more. Flow rate and total are easily programmed to the engineering units of choice in the field. The easy thread-in installation and quick setup procedure allow you to be up and running quickly. Transmitters can be mounted locally to the flow meter or remotely.

Features:

  • Backlit LCD Display
  • Rate and Totalization
  • HART communication (Optional)
  • Linearizer for additional accuracy
  • Frequency and 4-20 mA outputs
  • 2 opto-isolated limit switches

Recommended Sensors

Unit of Measure

Manufacturer Name

 N/A AW-Lake Company

Type

 N/A Flow Transmitter

Enclosure Style

 N/A Dual access, Aluminum

Housing Material

 N/A Aluminum

Mounting Type

 N/A Mounted directly on flow meter or in remote location

Power Requirement

 N/A 9-24 VDC / 200mA (customer supplied)

Analog Output 4-20mA

 N/A
  • PWM converter
  • 3- or 2-wire plus separate supply
  • Max load impedance 500 ohm

Three Opto-Isolated Open-Collector Outputs

 N/A
  • Programmable for frequency or limit outputs
  • 5-30 VDC rating
  • 40 mA max (min. load impedance required 600 Ohm at 30 VDC)

Sensor/Monitor Frequency Range

 N/A 0-4,500 Hz

Minimal Temperature

 N/A -4 ºF-20 ºC

Maximal Temperature

 N/A 185 ºF85 ºC

Connection

 N/A 3/4" female NPT conduit provisions

One Opto-Isolated Input

 N/A 9-24 VDC remote reset

Sensor Type

 N/A HUB-40SD1-S5-H2

Communication Protocol

 N/A None

L

 N/A 7.99 in203.01 mm

H

 N/A 7.71 in195.86 mm

N/A

  • Available in single and dual access models
  • Can be mounted directly on flow meter or in remote location
  • HART® communication protocol option for remote monitoring and programming

N/A

Options for Remote Indication
The RT-30 has options for remote flow monitoring:

  • Frequency pulse output (standard)
  • 4-20mA, user scalable (standard)
  • HART communication protocol (optional)

Easy Field Programming
Flow rate or total can be easily programmed to display in choice of engineering units. To program the unit simply use the magnet that is attached. No opening of the enclosure is required.

Remote Mounting Available
The RT-30 can be mounted remotely when used in conjunction with any AW frequency output sensor.

Up and Running in Minutes
A quick setup procedure allows you to have the flow monitor working with just a few simple programming steps.

Flexiable Mounting
The RT-30 unit can be rotated 360° for optimal viewing from any angle. Options available to fit any AW Gear Meter or Turbine Meter. Weather-Proof Enclosure NEMA 4X enclosure provides environmental protection from moisture and debris.

Quantity Available

 N/A {Unknown}

*1-5 Pieces

 N/A {Unknown}

*6-10 Pieces

 N/A {Unknown}

Std Lead Time

 N/A {Unknown}