Request Information

The Portable Ultrasonic Flow Meter provides non-intrusive flow measurement for the most challenging industrial environments and applications. The CE-approved device was designed to easily deploy measurement wherever you need it without process interruptions.  The IP67 portable handheld electronics is battery powered for up to 15 hours continuous operation. Clamp-on transducers can accommodate all common pipe materials at diameters from 0.5” to 48” and withstand temperatures from -40°F to 300°F. The meter comes with free datalogging software for data display, manipulation, analysis, and exporting.    

Applications include:

  • Clean, non-aerated fluids in full pipes
  • Water
  • Hydraulic oil
  • Glycol solutions
  • Diesel and chemicals
Unit of Measure

Manufacturer Name

 N/A AW-Lake Company

Type

 N/A Ultrasonic Flow Meter

Style

 N/A Portable

Transducers

 N/A Recommended for 12" to 48" (300mm to 1200mm) pipes, suitable for 4" to 48" (100 mm to 1200 mm) pipes, BNC connectors and cable strain-relief fittings for IP67 rating

Measuring Accuracy

 N/A ±1.0% of reading or ±0.015 ft/sec (±0.0046 m/s)

Repeatability & Linearity

 N/A ±0.25%

Flow Measuring Range

 N/A 0.07 to 40 ft/s0.02 to 12 m/s

Pipe Diameter

 N/A SE16A: 0.5" to 2" (15 to 50mm) SE16B: 2" to 10" (50 to 250mm) SE16C: 12" to 48" (300 to 1200mm)

Pipe Materials

 N/A Any metal or plastic sonic conducting materials, including carbon steel, stainless steel, ductile iron, concrete lined ductile iron, cast iron, PVC, HDPE, PVDF, fiberglass, copper, brass, aluminum, and pipes with bonded liners, including epoxy, rubber, and PTFE.

Operating Frequency

 N/A SE16A: 2.56 MHz SE16B: 1.28 MHz SE16C: 640 kHz

Transducer - Operating Temperature Range

 N/A -40 to 300 ºF-40 to 150 ºC

Electronics - Operating Temperature Range

 N/A -5 to 140 ºF-20 to 60 ºC

Power Input

 N/A
  • Built-in rechargeable lithium polymer battery for up to 15 hours of continuous use
  • External mains to USB-C charger with 100-240VAC, 50-60Hz, 0.6A input; and 5.0VDC, 3A, 15 at output

Ingress Protection Rating

 N/A IP65 when transducer cables not connected IP67 when cables connected

Outputs

 N/A Log files, daily log files, parameter settings files, and waveform capture files via USB-C flash drive (included)

Data Logger

 N/A 12 million point capacity, configurable for velocity or flow rate, date & time stamped, configurable format for Logger Software or CSV, available intervals of 10 s, 30 s, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, and 1 hr.

A

 N/A 8.66 in220 mm

B

 N/A 4.48 in114 mm

C

 N/A 2.56 in65 mm

N/A

  • 3 Transducer sizes to measure from 1/2" to 48" pipes
  • Rechargeable lithium batteries with up to 3 weeks of battery life
  • Rugged aluminum housing with silicone protective end caps
  • IP67 carrying case with protective molded foam and room for all transducer sizes and installation hardware
  • Transit Time Ultrasonic Principle of Measurement
  • Simple 5-Key Configuration (English, French, Spanish selectable)
  • 12 Million-Point Data Logger
  • Password Protected Backlit LCD Display
  • CE Approval

N/A

Non-Contacting Flow Measurement
Ultrasonic transducers clamp on the outside of pipes, allowing for installation without system shutdown, and produces no pressure drop.

User-Friendly Operating System
Built-in keypad and simple menu system for fast and easy programming of pipe diameter, pipe material, liquid type, and measurement units. All settings, calibration values, and totalizer are retained during power interruptions.

Wide Range of Applications
Compatible with a wide range of pipe materials and fluids, including treated, raw, cooling and lowconductivity water, water/glycol solutions, chemicals, and hydraulic, diesel and fuel oils.

Safe in Wet Locations
IP67 (NEMA 6) rating allows for safe operation during temporary periods of submergence.

Convenient Portable Tool
Transport all you need for on-demand flow measurement in a rugged, weather-tight carrying case. Approx. shipping weight of 12 lbs (5.5 kg)

N/A The Transit Time Flow Meter measures flow from the outside of pipes. It works by measuring the time of flight difference for ultrasonic sound pulses transmitted from one transducer to another. Depending on the mounting configuration, the signal may cross the pipe once, twice, or four times. The time between transmitted and received signals is precisely measured by the flow meter. Ultrasonic signals are sent upstream and then downstream with the transducers alternating their functions as transmitters/receivers.

The transit time in the direction of flow is always faster than the transit time against the flow. By comparing these differences with precision timing circuits, the meter is able to accurately calculate the flow rate. Because the ultrasonic signal is transmitted across the pipe, an average of the flow profile is calculated.

The transducers can be mounted on vertical or horizontal pipes, and the pipe must be full. Choice of V, Z, or W mounting method depends on the application and pipe diameter.

Quantity Available

 N/A {Unknown}

*1-5 Pieces

 N/A {Unknown}

*6-10 Pieces

 N/A {Unknown}

Std Lead Time

 N/A {Unknown}