JV-TC Positive Displacement Flow Meters were designed for measuring non-lubricating and filled fluids due to the specialized gear/shaft design, increased pressure rating (up to 6,000 psi), and improved flushability. These factors, along with the standard 7-point calibration and new EDGE sensor give you a 0.5% accurate meter across the full flow range – even in changing viscosity conditions.
Applications include:
Manufacturer Name |
N/A AW-Lake Company |
UOM |
N/A EA |
Type |
N/A Positive Displacement Gear Flow Meter |
Flow Range |
N/A 0.02 to 2.0 gpm0.1 to 7.6 L/min28.8 to 2880 gal/d |
Housing Seal |
N/A FKM o-ring |
Port Type |
N/A NPT |
Sensor Hole |
N/A 2x M14x1.5 |
Measuring Accuracy |
N/A ±0.25% optional with select sensors ±0.5% over full range with 30cP fluid |
Repeatability |
N/A ± 0.1% |
Operating Pressure [Max] |
N/A 420 bar6000 psi |
Ports |
N/A NPT standard, BSPP & bottom manifold mount optional |
Turndown |
N/A up to 400:1 |
Calibration |
N/A 7-point logarithmic calibration |
Resolution |
N/A 31800 pulses/gal8.4 pulses/cm³ |
Filtration |
N/A 120 µm |
Process Port Type |
N/A 1/4" NPT |
Weight |
N/A 4.9 lb2.2 kg |
Housing Material |
N/A 303 Stainless Steel / DIN 1.4305 |
Gears Material |
N/A Stainless Steel (DIN 1.4122) |
Bearing Material |
N/A Tungsten Carbide |
O-Ring Material |
N/A FKM |
Shaft Material |
N/A Tungsten Carbide |
Bolts Material |
N/A Zinc Flake Coated Carbon Steel (Inconel 718 optional) |
|
N/A
Choose from a wide variety of pickups, sensors, monitors, and controllers to pair with your gear meter:
|
|
N/A
AW-Lake offers a wide selection of Sensors/Pickups and
Monitors/Controllers to optimize flow measurement and
deliver your flow data where you need it and in the format
you need it:
|
