JV-TC Positive Displacement Flow Meters were designed for measuring non-lubricating and filled fluids due to the specialized gear/shaft design, increased pressure rating (up to 6,000 psi), and improved flushability. These factors, along with the standard 7-point calibration and new EDGE sensor give you a 0.5% accurate meter across the full flow range – even in changing viscosity conditions.
Applications include:
Manufacturer Name |
N/A AW-Lake Company |
UOM |
N/A EA |
Type |
N/A Positive Displacement Gear Flow Meter |
Flow Range |
N/A 0.005 to 0.8 gpm0.02 to 3.0 L/min7.2 to 1152 gal/d |
Housing Seal |
N/A PTFE o-ring |
Port Type |
N/A NPT |
Sensor Hole |
N/A 3/8" NPT |
Measuring Accuracy |
N/A ±0.25% optional with select sensors ±0.5% over full range with 30cP fluid |
Repeatability |
N/A ± 0.1% |
Operating Pressure [Max] |
N/A 420 bar6000 psi |
Ports |
N/A NPT standard, BSPP & bottom manifold mount optional |
Turndown |
N/A up to 400:1 |
Calibration |
N/A 7-point logarithmic calibration |
Resolution |
N/A 106000 pulses/gal28.0 pulses/cm³ |
Filtration |
N/A 120 µm |
Process Port Type |
N/A 1/4" NPT |
Weight |
N/A 3.6 lb1.6 kg |
Housing Material |
N/A 316L Stainless Steel / DIN 1.4404 |
Gears Material |
N/A Stainless Steel (DIN 1.4122) |
Bearing Material |
N/A Tungsten Carbide |
O-Ring Material |
N/A PTFE |
Shaft Material |
N/A Tungsten Carbide |
Bolts Material |
N/A Zinc Flake Coated Carbon Steel (Inconel 718 optional) |
|
N/A
Choose from a wide variety of pickups, sensors, monitors, and controllers to pair with your gear meter:
|
|
N/A
AW-Lake offers a wide selection of Sensors/Pickups and
Monitors/Controllers to optimize flow measurement and
deliver your flow data where you need it and in the format
you need it:
|
