AW-Lake
AW-Lake
2440 W. Corporate Preserve Dr. #600
Oak Creek, WI 53154 USA
Phone: 414.574.4300
Fax: 414.574.4301
Email: info@aw-lake.com
Website: www.aw-lake.com
Print Back

The Flow Rate Alarm is a rugged “flow switch” device that monitors flow and sends a signal using simple on/off logic if rates are out of spec. The weather tight NEMA 4x cast aluminum enclosure allows for outdoor installation and washdowns. Alarm settings are easily adjusted in the field with an allen wrench. The standard Hirschman interconnection provides easy installation and maintenance.

Applications include:

  • Cooling systems
  • Lubrication systems
  • Mobile hydraulic equipment
  • Industrial process control systems
Unit of Measure

Technical Specs

Manufacturer Name

 N/A AW-Lake Company

Motion Item Number

 N/A 02959997

MINO

 N/A 05596J07012

UOM

 N/A EA

Type

 N/A Flow Rate Alarm

Meter Style

 N/A 2 Switches

Port Size Range

 N/A 1/4" - 1/2"

Material

 N/A Stainless Steel

Operating Pressure [Max]

 N/A 69 bar1000 psi

Fluid Media

 N/A Air & Gases

Porting/Thread Type

 N/A #8 SAE, O-ring seal

Flow Range - Air

 N/A 10 to 100 scfm

Optional Flow Direction

 N/A Standard Flow, Uni-Directional

Measuring Accuracy

 N/A ±2.0% of Full Scale

Repeatability

 N/A ±1% of full scale

Flow Measuring Range

 N/A 0.1 to 150 gpm0.5 to 550 L/min1 to 600 slps2 to 1300 scfm

Operating Temperature [Max]

 N/A 185 ºF85 ºC

Standard Calibration Fluids

 N/A Air meters: air at 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar) Oil meters: DTE 25® at 110°F (43°C), 0.873 sg Water meters: tap water at 70°F (21°C), 1.0 sg

Alarm Switch Dead-band

 N/A 4% of full scale

Alarm Switch Contacts

 N/A SPDT (dry contact). 10 amps and 1/4 hp, 125 or 250 VAC. 1/2 amp, 125 VDC (regulated); 1/4 amp, 250 VDC (regulated); 3 amps, 125 VAC “L” (lamp load)

Filtration Requirements

 N/A 74 micron filter or 200 mesh screen minimum

Viscosity

 N/A Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory.

Process Port Type

 N/A #8 SAE

Non-wetted Components Materials

Enclosure & Cover Material

 N/A Painted Aluminum

Seals Material

 N/A Buna-N®

Window Material

 N/A Pyrex®

Din Connector Material

 N/A Polyamide

Wetted Components Materials

Casing & End Ports Material

 N/A Stainless Steel 303

Seals Material

 N/A FKM with PTFE backup (STD), Buna-N, EPR or Kalrez®

Transfer Magnet Material

 N/A PTFE coated Alnico

All Other Internal Parts Material

 N/A Stainless Steel

Dimensions

A

 N/A 6-9/16 in167 mm

B

 N/A 2-3/16 in56 mm

C

 N/A 4 in101 mm

D

 N/A 1-7/8 in47 mm

E

 N/A 4-7/8 in128 mm

F

 N/A 2-1/4 in57 mm

Benefits

N/A

    Field Adjustable Alarm Setting
    Only an allen wrench is required to change the flow alarm setting.

    Weather-Tight Construction
    Rugged cast aluminum NEMA type 4X enclosure allows installation outdoors and in environments where liquid tight seals are required.

    Simple On/Off Logic
    Positive alarm points using dry-contact, SPDT switches, reduce the complexity found in standard rotameter OFF/ON/OFF circuits.

    Pre-Wired with Cable Disconnect
    The standard Hirschmann interconnection provides easy installation and maintenance of the Flow Alarm and the system it is a part of.

    Economical Protection
    This monitor rapidly pays for itself as it "sounds the alarm" on incorrect pneumatic, lubrication or cooling volumes, protecting expensive equipment and reducing downtime.

Quick Ship

Quantity Available

 N/A {Unknown}

*1-5 Pieces

 N/A {Unknown}

*6-10 Pieces

 N/A {Unknown}

Std Lead Time

 N/A {Unknown}