Item # CUTT-A1A2-B-1A1A, Clamp-on Ultrasonic Flow Meter On AW-Lake

Gear Meters Gear Meters
Variable Area Meters Variable Area Meters
Coriolis Mass Flow Meters Coriolis Mass Flow Meters
Paddle Wheel Flow Meter Paddle Wheel Flow Meter
Helical Flow Meters Helical Flow Meters
Turbine Flow Meters Turbine Flow Meters
Ultrasonic Flow Meters Ultrasonic Flow Meters
Flow Electronics Flow Electronics
Rotary Piston Rotary Piston
Turbidity Sensor Turbidity Sensor

Gear Meters

Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.

Learn More

Variable Area Meters

Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.

Learn More

Coriolis Mass Flow Meters

TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.

Learn More

Paddle Wheel Flow Meter

Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.

Learn More

Helical Flow Meters

Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.

Learn More

Turbine Flow Meters

Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.

Learn More

Ultrasonic Flow Meters

Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.

Learn More

Flow Electronics

Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.

Learn More

Rotary Piston

Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.

Learn More

Turbidity Sensor

AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.

Learn More

Fluid Power / Hydraulics

Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.

Oil & Gas

From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.

Heavy Industrial

For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.

Paints/Sealants/Adhesives

Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.

Water Cooling

Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.

General Industrial

General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.

Test Systems

With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.

Alternative Energy

As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.

Marine

In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.

Chemical

AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.

Environmental

As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.

Our Products

The flow measurement products produced and/or supplied by AW-Lake include the following:

Request Information

List Price

$5,122.00

Qty.

Std Lead Time
Add To Cart

Quick Ship

Quantity Available
*1-5 Pieces
*6-10 Pieces

Using the Transit Time measurement principle, the CUTT Clamp-On Ultrasonic Flow Meter fastens on the outside of vertical or horizontal pipes ranging in size from ½” through 48”. Housed in a water- and dust-tight NEMA4X polycarbonate enclosure, the Clamp-On Ultrasonic Flow Meters offer Isolated 4-20 mA and 0-5 V analog output. The non-intrusive flow measurement allows measurement of the most “corrosive liquids” that would damage standard flow meters. Clamp-on transducers can accommodatemore

Unit of Measure

Manufacturer Name	N/A AW-Lake Company
Type	N/A Ultrasonic Flow Meter
Style	N/A Clamp-on
Power Input	N/A 100-240VAC, 50/60Hz, 10VA Max.
Enclosure & Electronics Protection	N/A NEMA4X (IP66) polycarbonate enclosure
Enclosure Temperature Rating	N/A -5 to 140 ºF-20 to 60 ºC
Intrinsic Safety Rating	N/A QTY 2 ISB Intrinsic Safety Barriers for transducer installation in Class 1 Div 1, Groups C, D; Class 2, Groups E, F, G; Class 3; Type 4
Transducers	N/A E16B pair, clamp-on for 2" to 48" (50 mm to 1200 mm) pipes
Transducer Mounting Hardware	N/A TMK-B1; Includes stainless brackets, mounting clamps, alignment bar, and silicone coupling compound.
Cables & Connections	N/A 25 ft/7.6 m pair triaxial with BNC connectors and seal jackets
Serial Communications	N/A None
Control Relays	N/A 2 relays, rated 5 amp SPDT, programmable
Measuring Accuracy	N/A ±1.0% of reading from 1.5 to 40 ft/sec (0.5 to 12.0 m/sec) and ±0.015 ft/sec (±0.0046 m/sec) for velocity below 1.5 ft/sec (0.46 m/sec).
Repeatability & Linearity	N/A ±0.25%
Flow Measuring Range	N/A 0.07 to 40 ft/s0.02 to 12 m/s
Pipe Diameter	N/A SE16A: 0.5" to 4" (15 mm to 100 mm) SE16B: 2" to 48" (50 mm to 1200 mm)
Pipe Materials	N/A Any metal or plastic sonic conducting materials, including carbon steel, stainless steel, ductile iron, concrete lined ductile iron, cast iron, PVC, HDPE, PVDF, fiberglass, copper, brass, aluminum, and pipes with bonded liners, including epoxy, rubber, and PTFE.
Operating Frequency	N/A SE16A: 2.56 MHz SE16B: 1.28 MHz
Transducer - Operating Temperature Range	N/A -40 to 300 ºF-40 to 150 ºC
Electronics - Operating Temperature Range	N/A -5 to 140 ºF-20 to 60 ºC
Analog Output	N/A Isolated 4-20mA/0-5V, 1000 ohm load max., programmable offset
Hazardous Area Certifications	N/A Non-Incendive for Class I Division 2, Groups A,B,C,D Optional: Intrinsically safe for Class I Division 1, Groups A,B,C,D
Approximate Shipping Weight	N/A 12 lb5.5 kg

A	N/A 10.94 in278 mm
B	N/A 7.4 in188 mm
C	N/A 5.12 in130 mm
D	N/A 10 in254 mm
E	N/A 6.46 in164 mm

N/A

Transit Time Ultrasonic Principle of Measurement
1/2" through 48" Pipe Size Range
Simple 5-Key Configuration (English, French, Spanish selectable)
4-20mA/0-5V Analog Output
26 Million-Point Data Logger
Password Protected Backlit LCD Display
Watertight & Dust Tight NEMA4X (IP66) Polycarbonate Enclosure
Modbus® RTU or HART® Optional
CE, UL/EN 61010-1 Approvals

N/A

Non-Contacting Flow Measurement
Ultrasonic transducers clamp on the outside of pipes, allowing for installation without system shutdown, and produces no pressure drop.

User-Friendly Operating System
Built-in keypad and simple menu system for fast and easy programming of pipe diameter, pipe material, liquid type, and measurement units. All settings, calibration values, and totalizer are retained during power interruptions.

Industrial Automation Protocols
Modbus RTU and HART communications allow for instantaneous flow rate, volumentotal, run hours, and diagnostic information.

Wide Range of Applications
Compatible with a wide range of pipe materials and fluids, including treated, raw, cooling and lowconductivity water, water/glycol solutions, chemicals, and hydraulic, diesel and fuel oils.

Safe in Wet Locations
IP67 (NEMA 6) rating allows for safe operation during temporary periods of submergence.

N/A The Transit Time Flow Meter measures flow from the outside of pipes. It works by measuring the time of flight difference for ultrasonic sound pulses transmitted from one transducer to another. Depending on the mounting configuration, the signal may cross the pipe once, twice, or four times. The time between transmitted and received signals is precisely measured by the flow meter. Ultrasonic signals are sent upstream and then downstream with the transducers alternating their functions as transmitters/receivers.

The transit time in the direction of flow is always faster than the transit time against the flow. By comparing these differences with precision timing circuits, the meter is able to accurately calculate the flow rate. Because the ultrasonic signal is transmitted across the pipe, an average of the flow profile is calculated.

The transducers can be mounted on vertical or horizontal pipes, and the pipe must be full. Choice of V, Z, or W mounting method depends on the application and pipe diameter.

Loading zoom

Our Products

Manufacturer Name

Type

Style

Power Input

Enclosure & Electronics Protection

Enclosure Temperature Rating

Intrinsic Safety Rating

Transducers

Transducer Mounting Hardware

Cables & Connections

Serial Communications

Control Relays

Measuring Accuracy

Repeatability & Linearity

Flow Measuring Range

Pipe Diameter

Pipe Materials

Operating Frequency

Transducer - Operating Temperature Range

Electronics - Operating Temperature Range

Analog Output

Hazardous Area Certifications

Approximate Shipping Weight