The flow measurement products produced and/or supplied by AW-Lake include the following:
The JV-UF is designed for low viscosity fluids (solvents, scale inhibitor, methanol, DEF) thanks to the exceptionally tight clearances around the gears which prevent fluid from slipping past. This meter can measure very low flow rates (as low as 0.0005 gpm with a 5cP fluid and as high as 20 gpm).
Applications include:
- Chemical injection
- Fuel injection & dosing systems
- Test stands
- Hydraulic positioning systems
- Coolant & lubrication monitoring
Unit of Measure
Manufacturer Name |
N/A AW-LAKE COMPANY |
UOM |
N/A EA |
Type |
N/A Positive Displacement Gear Flow Meter |
Flow Range |
N/A 0.005 to 0.25 gpm0.002 to 1.0 L/min0.72 to 360 gal/d |
Housing Seal |
N/A PTFE o-ring |
Port Type |
N/A NPT |
Sensor Hole |
N/A 2x M14x1.5 |
Measuring Accuracy |
N/A ±0.5% optional with select sensors ±1.5% over full range (viscosity ≥ 5cP) ±2.5% over full range (viscosity ≥ 5cP) for JV-01UF |
Repeatability |
N/A ± 0.05% |
Operating Pressure [Max] |
N/A 345 bar5000 psi |
Ports |
N/A NPT standard, BSPP optional |
Turndown |
N/A up to 500:1 |
Calibration |
N/A 7-point logarithmic calibration |
Resolution |
N/A 302600 pulses/gal80.0 pulses/cm³ |
Filtration |
N/A 15 µm |
Process Port Type |
N/A 1/4" NPT |
Weight |
N/A 3.6 lb |
Housing Material |
N/A 316L Stainless Steel / DIN 1.4404 |
Gears Material |
N/A Stainless Steel (DIN 1.4122) |
Bearing Material |
N/A Stainless Steel (DIN 1.4122) |
O-Ring Material |
N/A PTFE |
Shaft Material |
N/A 402 Stainless Steel |
Bolts Material |
N/A Zinc Flake Coated Carbon Steel (Inconel 718 optional) |
A |
N/A 3.3 in |
B |
N/A 3.2 in |
C |
N/A 0.47 in |
D |
N/A 1.7 in |
H |
N/A 2.2 in |
|
N/A
Choose from a wide variety of pickups, sensors, monitors, and controllers to pair with your gear meter:
|
|
N/A
AW-Lake offers a wide selection of Sensors/Pickups and
Monitors/Controllers to optimize flow measurement and
deliver your flow data where you need it and in the format
you need it:
|
