The pulse output HUB-40SD Flow Sensor is ideal for any industry or flow measurement application where a non-hazardous sensor is required. The HUB-40SD is available with and without a stainless steel NEMA 4X enclosure, which protects internals from moisture and debris, allowing use outdoors. Users choose from four sensor options: Hall (sinking), Hall (sourcing), carrier, or inductive.
Available Outputs:
- Frequency (square wave with 50% duty cycle)
Manufacturer Name |
N/A AW-Lake Company |
Type |
N/A Flow Sensor |
Junction Box Options |
N/A No junction box |
Housing Material |
N/A 316 SS |
Meter Size Thread Type |
N/A M14 |
Sensor Type |
N/A Carrier sensor |
Termination |
N/A Flying leads |
Supply Voltage |
N/A 10 to 24 V |
Supply Current |
N/A 12 mA at 24 VDC 8 mA at 12 VDC |
Sensor/Monitor Frequency Output |
N/A Flow dependent, 0.5 Hz minimum |
Output Amplitude |
N/A VHIGH = VSUPPLY - 0.7 Volts VLOW = 0 Volts |
Duty Signal |
N/A 50% ± 15% |
Connections |
N/A 3 pin connector Flying leads JST Connector Junction bix with terminal block |
Operating Temperature [Min] |
N/A -4 ºF-20 ºC |
Operating Temperature [Max] |
N/A 140 ºF85 ºC |
A |
N/A 1.7 in42.6 mm |
B |
N/A 3.6 in91.8 mm |
C |
N/A 4.5 in115.24 mm |
D |
N/A 3.5 in90 mm |
N/A
|
N/A
Up and Running in Minutes Flexible Mounting Weather-Proof Enclosure Built-In Protection |
Quantity Available |
N/A {Unknown} |
*1-5 Pieces |
N/A {Unknown} |
*6-10 Pieces |
N/A {Unknown} |
Std Lead Time |
N/A {Unknown} |