Request Information

The pulse output HUB-40SD Flow Sensor is ideal for any industry or flow measurement application where a non-hazardous sensor is required. The HUB-40SD is available with and without a stainless steel NEMA 4X enclosure, which protects internals from moisture and debris, allowing use outdoors. Users choose from four sensor options: Hall (sinking), Hall (sourcing), carrier, or inductive.

Available Outputs:

  • Frequency (square wave with 50% duty cycle)
Unit of Measure

Manufacturer Name

 N/A AW-Lake Company

Type

 N/A Flow Sensor

Junction Box Options

 N/A No junction box

Housing Material

 N/A 316 SS

Meter Size Thread Type

 N/A M14

Sensor Type

 N/A Hall sensor (sourcing version)

Termination

 N/A Flying leads

Supply Voltage

 N/A 10 to 24 V

Supply Current

 N/A 12 mA at 24 VDC 8 mA at 12 VDC

Sensor/Monitor Frequency Output

 N/A Flow dependent, 0.5 Hz minimum

Output Amplitude

 N/A VHIGH = VSUPPLY - 0.7 Volts VLOW = 0 Volts

Duty Signal

 N/A 50% ± 15%

Connections

 N/A 3 pin connector Flying leads JST Connector Junction bix with terminal block

Operating Temperature [Min]

 N/A -4 ºF-20 ºC

Operating Temperature [Max]

 N/A 140 ºF85 ºC

A

 N/A 1.7 in42.6 mm

B

 N/A 3.6 in91.8 mm

C

 N/A 4.5 in115.24 mm

D

 N/A 3.5 in90 mm

N/A

  • Square wave output signal has a duty cycle of approximately 50%.
  • For use with most meter sizes of the following AW-Lake flow meters:
    • JVM-xxx gear meters
    • JVS-xxx gear meters
    • JVHS-xxx gear meters
    • ZHM-xxx gear meters
    • HPM-xxx turbine meters
    • HM-xxx turbine meters
    • TRG-xxx turbine meters
    • SRZ-xxx gear meters

N/A

Up and Running in Minutes
Easy thread-in installation. A quick setup procedure allows you to have the sensor working with just a few simple installation steps.

Flexible Mounting
Because of the integral swivel union, the HUB-40 unit can be rotated 360° for easy wiring. Options available to fit any AW Gear Meter or Turbine Meter.

Weather-Proof Enclosure
NEMA 4X enclosure provides environmental protection from moisture and debris.

Built-In Protection
The signal outputs are protected by a selfresetting fuse with a 50 mA nominal trip point.

Quantity Available

 N/A {Unknown}

*1-5 Pieces

 N/A {Unknown}

*6-10 Pieces

 N/A {Unknown}

Std Lead Time

 N/A {Unknown}